Shoreport PWC Dock
After a great run, give your Personal Water Craft one last flick of the throttle and slide up on a ShorePort for the fastest, easiest, simplest dry dock on water. With a ShorePort from ShoreMaster, you just drive on to load and roll off to launch, for the ultimate in docking and protecting your PWC. The adjustable polyurethane rollers and cupped front conform to any hull design. And you can use the ShorePort with almost any dock, fixed or floating.

Rhino Floats
It goes without saying that the most important part of any floating dock is the flotation. That’s why we take no chances with our ShoreMaster flotation technology. Each flotation shell is rotationally molded from durable polyethylene for a seamless, one-piece construction. The polyethylene shells are then filled with expanded polystyrene (EPS) foam so they will not sink or contaminate the water even if punctured.

Blue Dow Billets
Styrofoam™ extruded polystyrene Buoyancy Billets are an excellent choice for floating structures such as docks, rafts and boathouses. Styrofoam Buoyancy Billets consist of millions of tiny closed-cell air bubbles. That makes it extremely buoyant. It also means structures cannot become punctured or water-logged. Buoyancy billets are lightweight and easy to install, so structures can be built quickly and efficiently. In stock size 10" x 20" x 8'.

Dock Poles
A floating dock is a platform or ramp supported by pontoons. These are usually joined to the shore with a ramp that rests upon the dock on rollers, to adjust for the vertical movement of the dock. The dock is usually held in place by vertical poles embedded in the soil under the water or by anchored cables.

Frequently used in small boat marinas, this type of dock maintains a fixed vertical relationship to watercraft secured to it, independent of tidal, river or lake elevation. It is less suited for larger craft as the docks cannot support large structures or cranes.

The Lumber Depot stocks poles ranging in size from 10 to 40-feet in length.

NOTE: THE 40-foot length is unique in the industry.

Bumpers
All of our products are made using the best materials available. They are UV-stablized and are formulated for longevity.

Our first bumper is fastened to the deck using stainless steel screws or nails - about every 8 inches. This bumper is designed to cover the corner of the dock and has tapered edges, for a streamlined appearance. Installation is as easy as nailing or screwing fasteners every 8 inches on the top and side of the extrusion. Available in black or white.

Hardware
We proudly stock high quality, dock building hardware, pile retainers and dock ladders. Wood dock systems and aluminum gangways are available by special order.

We also distribute the finest line of float drums on the market, rub rail, marine fasteners, pile caps, dock cleats, other marine development accessories and boat lifts.

Ladders
The sturdy, space-saving design of our aluminum ladders make them a perfect choice for getting in and out of the water. Constructed from marine-grade aluminum, 1-1/4 inch and 1-1/2 inch pipe are welded for maximum strength. The ladders are ideal for use on swim floats, docks, and seawalls.

Ladders are available with 4 and 5 steps. Our “flip ladders” are hinged so they can swing up and out of the water when not in use.

Rope
We stock 1-1/2-inch unmanila rope.